All projects

Hardware & embedded

OleoLens

A handheld optical tester and app for oil quality in the field.

OleoLens handheld oil quality analyser with a pure oil result on screen

The project

Overview.

OleoLens is a handheld instrument and mobile app that verify the quality of edible and industrial oils in about 30 seconds.

The handheld combines an optical engine and a reusable sample cartridge to screen for dye adulteration, dilution and authenticity, and returns a plain-language verdict on its display. A companion app records results and supports field use. Ushcodex led product design, the embedded prototype (ESP32-S3, C, Arduino), the 3D enclosure and cartridge models, and the interface.

01 / The problem

Quality is judged by eye, and dye is invisible

Palm oil is traded on colour and smell. Sudan dyes restore the deep red buyers expect, at concentrations the eye cannot detect, and a rejected container can cost a producer the lot and the buyer.

A laboratory test costs more than many small mills can justify for every batch, so quality is often accepted without a measurement.

02 / The build

A handheld instrument and a companion app

The handheld reads a single drop through a reusable cartridge and returns a verdict in about 30 seconds. The interface reports plain outcomes such as pure oil, dye suspect or dye found, rather than raw spectra.

The team built the enclosure and cartridge in OpenSCAD, assembled the ESP32-S3 prototype with C and Arduino, and developed the app interface during the NSChE 2026 Hackathon. Ushcodex led the product and embedded work.

03 / The result

Winner, NSChE 2026 Hackathon Design Challenge

The project won the NSChE 2026 Hackathon Design Challenge in Port Harcourt. The next stage is calibration against laboratory reference samples and a pilot with mills and cooperatives.

Result

Winner, NSChE 2026 Hackathon Design Challenge. A working prototype and 3D design were completed during the three-day event in Port Harcourt.

Next projectESP Edge Monitor

Have a project in mind?

Let’s discuss your project.

Start a project